Thursday, July 3rd    14:00 - 16:00
Advanced Materials: Computational Analysis of Properties and Performance I
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
Room: CAS3.1
MS209A
14:00 Thermomechanics of Polymers under Conditions of Relaxation and Phase Transitions (Keynote Lecture)
Valery P. Matveyenko, O.Y. Smetannikov, N.A. Trufanov and I.N. Shardakov

14:30 Standard and Impact Fatigue of Bonded Joints: Modelling Transient Strains and Progressive Damage (Keynote Lecture)
Ian Ashcroft, Juan Pablo Casas-Rodriguez and Vadim Silberschmidt

15:00 Micromechanics Based Structural Analyses of MMC Components under Finite Strains
Heinz Pettermann, Sergio Nogales, Christopher Huber, Mathias Luxner and Helmut Böhm

15:20 Constitutive Equations for Dissipative Materials operating under Finite Deformations
Alexander Svistkov, Bernd Lauke and Gerd Heinrich

15:40 V&V Concepts in Developing a Class of Finite Deformation Pressure Dependent Plasticity Models validated by Experimental Observations
Szanto Mordechai, Z. Yosibash, M. Dariel, N. Frage, W. Bier, Stefan Hartmann, Alexander Düster, U. Heisserer, Ernst Rank and Stefan Holzer

Thursday, July 3rd    16:30 - 18:30
Advanced Materials: Computational Analysis of Properties and Performance II
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
Room: CAS3.1
MS209B
16:30 Simulations of Damage in Cross-Ply Laminates under Tensile Fatigue: Effect of Microstructural Randomness
Zahid R. Khokhar, Ian Ashcroft and Vadim Silberschmidt

16:50 Micromechanical Modeling of Random Composites with Irregularly Shaped Inhomogeneities
Igor Tsukrov, Romana Piat and Oleg Eroshkin

17:10 Micromechanical Material Modeling of Interpenetrated Metal-Ceramic Composites
Romana Piat, Mickael Guichard and Thomas Böhlke

17:30 Multiscale and Multyphysics Modeling of Filled Composites, Design Validation of the Models and Uncertainty in the Modelling
Sergey Lurie, Dmitrii Volkov-Bogorodskii, Natalia Tuchkova and Vladimir Zubov

17:50 Thermomechanical Energetic Models for Multi-phase Materials
Tom-Alexander Langhoff, Thomas Boehlke and Eckart Schnack

18:10 Modelling Damage and Failure of Mineral Polycrystalline Matrices in Fibrous Composites
Vyacheslav Shavshukov and Anatoly Tashkinov

Friday, July 4th    10:30 - 12:30
Advanced Materials: Computational Analysis of Properties and Performance III
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
Room: CAS3.1
MS209C
10:30 Conventional and Ultrasonically Assisted Bone Cutting: Finite Element Study
Khurshid Alam, Alexander Mitrofanov, Martin Bäker and Vadim Silberschmidt

10:50 Local Toughness in Human Cortical Bone Microstructures by an X-FEM Imaging Technique
Thierry Hoc, Elisa Budyn and Sebastien Uzel

11:10 Finite Element Analysis of Thermally Bonded Nonwoven Material
Xiaonan Hou, Memiş Acar and Vadim V. Silberschmidt

11:30 Numerical Modelling of Thermally Bonded Bi-Component Fibre Nonwovens
Emrah Demirci, Memiş Acar, Behnam Pourdeyhimi and Vadim Silberschmidt

11:50 Modelling Specimens Testing for 3D Fiber Composites Tensile Strength Characterization
Aleksandr Anoshkin, Anatoly Tashkinov, Vyacheslav Shavshukov and Ilja Straumit

12:10 Development of a Three Dimensional Grain Structure Submodel for Numerical Modelling of TI-6Al-4V at Elevated Strain Rates
Helen Sarsfield and Nik Petrinic

Friday, July 4th    14:00 - 16:00
Advanced Materials: Computational Analysis of Properties and Performance IV
Minisymposium organized by Vadim Silberschmidt and Valery Matveenko
Room: CAS3.1
MS209D
14:00 Analytical and Numerical Models for Bloch Waves and Localised Defect Modes in Perforated Plates
Alexander Movchan, Natasha Movchan and Ross McPhedran

14:20 Effective Properties of Magnetoelectroelastic Materials with Aligned Ellipsoidal Voids (New)
Baolin Wang

14:40 Nucleation and Growth of Voids in Solder Joints of MEMS
Kerstin Weinberg and Wolfgang Müller

15:00 A Model for Eutectoid Steel subjected to Heat Treatment and its Finite Element Simulation
Mauro Fabrizio, Mirko Maraldi, Luisa Molari, Pier Gabriele Molari and Francesco Ubertini

15:20 Efficient Methods for High Cycle Fatigue Assessment of Components Containing Defects
Hans-Peter Gaenser and Juergen Froeschl

15:40 Solution to Optimization Problems of Dynamic Properties of Electrioviscoelastic Systems with Electric Resonant Filters
Evgeny P. Kligman, Natalya A. Yurlova and Nikita F. Putin

 

International Center for Numerical Methods in Engineering. Barcelona, Spain.
iacm-eccomas08@cimne.upc.edu / Telf. + 34 - 93 401 74 41
Copyright © 2008 CIMNE, All Rights Reserved.