IACM/ECCOMAS Congress 2008

Thursday, July 3rd 10:30 - 12:30
Damage and Interfacial Delamination Modelling in Composite Materials I
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco

Room: CAS3.10
MS103A

10:30 Delamination Study of Z-Pinned Composite Laminates
Tiziana Turetta, Alessia Cottone and Giuseppe Giambanco

10:50 Ductile Failure of Heterogeneous Materials: A Cohesive-Volumetric Approach Coupling Analytical and Numerical Homogenization Models
Yann Monerie, Frédéric Perales and Pierre-Guy Vincent

11:10 Computational Estimation of Macroscopic Constitutive Behavior in Composite Materials
Domenico Bruno, Fabrizio Greco, Paolo Lonetti and Paolo Nevone Blasi

11:30 Justification of the Periodic Distribution of Transverse Cracks in a Composite by Energy Minimization
Blaise Bourdin and Jean-Jacques Marigo

11:50 Modelling of the Bond Behaviour of CFRP Laminates Glued on Clay Bricks
Ernesto Grande, Maura Imbimbo and Elio Sacco

12:10 Numerical Homogenization of Periodic Composites by Prescribing the Average Stress
Andrea Caporale and Raimondo Luciano

Thursday, July 3rd 14:00 - 16:00
Damage and Interfacial Delamination Modelling in Composite Materials II
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco

Room: CAS3.10
MS103B

14:00 Analysis of Dynamic Interfacial Crack Growth in Fiber-Reinforced Composite Structures
Domenico Bruno, Fabrizio Greco, Paolo Lonetti and Paolo Nevone Blasi

14:20 Interlaminar Decohesion and Inner-layer Damage in Composite Structures
Guido Borino, Boris Failla and Francesco Parrinello

14:40 Static and Dynamic Interaction Effects of Multiple Damage Mechanisms in Multilayered Structures
Roberta Massabò

15:00 Competition between Penetration and Debonding at an Interface in Brittle Matrix Composites
Eric Martin, Benoit Poitou and Dominique Leguillon

15:20 Progressive Interfacial Failure of Adhesive Joints based on a 1D Model of Decohesion
Ilaria Monetto

Thursday, July 3rd 16:30 - 18:30
Damage and Interfacial Delamination Modelling in Composite Materials III
Joint IACM – IUTAM Minisymposium
Minisymposium organized by Domenico Bruno, Frédéric Lebon and Elio Sacco

Room: CAS3.10
MS103C

16:30 Biomodular Thin-Walled Beams: A Variational Model Based on a Dual Constrained Approach
Franco Maceri and Giuseppe Vairo

16:50 Models of Slightly Curved Defects in Layered Materials
Mikhail A. Grekov

17:10 Premature Debonding Failures of Plate Bonded Reinforced Concrete Beams: A Limit Analysis Approach
Vincenzo Colotti

17:30 A Generalized Differential Quadrature Solution for Laminated Composite Shells of Revolution
Francesco Tornabene and Erasmo Viola

17:50 Finite Element Implementation of Inter-Elements Discontinuities with Zero Elastic Opening and Plastic-Damaging Response
Massimo Cuomo

18:10 A Crack-Length Control Scheme for the Analysis of Snap-Back Instability in the Delamination of Strengthened Beams
Alberto Carpinteri and Marco Paggi