IACM/ECCOMAS Congress 2008

Monday, June 30th 11:30 - 12:30 Numerical Techniques for the Modelling of Material Failure in Solids I Minisymposium organized by Xavier Oliver and Francisco Armero	Room: CAS3.7 MS237A
11:30 Spalling of Concrete: Micro - and Macro Experiments and Simulations (Keynote Lecture) Kaspar Willam, Keun Lee, Jaesung Lee and Yunping Xi 12:00 3D Higher Order X-Fem Model for Hygro-Mechanical Analysis of Cracked Cementitious Materials (Keynote Lecture) Stefan Jox, Christian Becker and Günther Meschke

Monday, June 30th 14:00 - 16:00
Numerical Techniques for the Modelling of Material Failure in Solids II
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237B

14:00 Modelling Concrete Cracking due to Rebar Corrosion using Finite Elements
Beatriz Sanz, Jaime Planas and José M. Sancho

14:20 Modeling of Concrete Cracking Induced by Steel Corrosin Expansion
Santiago Guzmán, Jaime C. Galvez and José M. Sancho

14:40 Numerical Modelling of the Load Carrying Capacity Degradation in Concrete Beams due to Reinforcement Corrosion
Pablo Sánchez, Alfredo Huespe, Javier Oliver and Sebastián Toro

15:00 A Viscous Cohesive Model to Analyze Rate-Dependent Fracture in Concrete
Gonzalo Ruiz, Rena C. Yu and Alaor Rosa

15:20 A Mixture Continuum Approach for Three-Dimensional Analysis of Reinforced Concrete Members using Embedded Crack Finite Elements
Osvaldo Manzoli, Javier Oliver, Alfredo Huespe and Guillermo Diaz

15:40 The Performance Dependent Failure Criterion for Normal and High Strength Concretes
Paula Folino, Guillermo Etse and Adrián Will

Monday, June 30th 16:30 - 18:30
Numerical Techniques for the Modelling of Material Failure in Solids III
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237C

16:30 Three Dimensional Numerical Modelling of Brittle Fracture in Solids
Philippe Jäger, Paul Steinmann and Ellen Kuhl

16:50 Localization, Damage and Fracture Modelling in Shell Structures
Pawel Woelke, Najib Abboud, Raymond Daddazio and George Voyiadjis

17:10 Application of Coupled Elasto-Plastic-Damage Model with Non-Local Softening to Concrete Materials
Irek Marzec and Jacek Tejchman

17:30 A Discontinuous Galerkin Formulation for Gradient Plasticity at Finite Deformations
Andrew McBride and Daya Reddy

17:50 Fracture Energy-Based Gradient Plasticity Formulation for Concrete
Guillermo Etse and Sonia Vrech

18:10 Alternative Aspects of Cohesive Crack Modeling with MPM
Jason Sanchez, Howard Schreyer and Deborah Sulsky

Tuesday, July 1st 10:30 - 12:30
Numerical Techniques for the Modelling of Material Failure in Solids IV
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237D

10:30 Analysis of Strong Discontinuities in Partially-Saturated Poroplastic Solids
Carlo Callari, Francisco Armero and Andrea Abati

10:50 Modelling of Failure in Solids by Embedded Discontinuities. Displacements and Strain-Displacements Formulations of Finite Element
Jaime Retama and Gustavo Ayala

11:10 Approximation of the Displacement and Mixed Formulations of Solids with Embedded Discontinuities using the Meshless Element Free Galerkin Method
Félix Saucedo, Gustavo Ayala and Gelacio Juárez

11:30 Numerical Modelling of Growth and Propagation of Interfaces by Means of the Embedded Discontinuities Approach
Loredana Contrafatto and Massimo Cuomo

11:50 Mixed Finite Approximation of the Material Failure Process with Continuum Damage Models: Shear Failure Material Mode
Gelacio Juárez and Gustavo Ayala

12:10 Modeling of Discontinuous Failures in Beams and Plates
Jaka Dujc, Bostjan Brank and Adnan Ibrahimbegovic

Tuesday, July 1st 14:00 - 16:00
Numerical Techniques for the Modelling of Material Failure in Solids V
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237E

14:00 A Dissipation-Based Arc-Length Method for Robust Simulation of Failure
Clemens Verhoosel, Joris Remmers and Miguel Gutiérrez

14:20 Crack Tip Plasticity and Asymptotic Strain Fields in Extended Finite Element Formulation
Ronaldo Borja and Fushen Liu

14:40 Towards 3D-Modeling of Failure for Composites by the Extended Finite-Element Method and Level Sets
Ingrid Bruss and Ekkehard Ramm

15:00 Quasi-Static Crack Propagation in Concrete with Cohesive Elements under Mixed-Mode Conditions
Jerzy Bobinski and Jacek Tejchman

15:20 Rate-Independent Energetic Approach to Stochastic Damada Mechanics of Discrete Lattices
Jan Zeman, Ron H.J. Peerlings and Marc Geers

15:40 Extraction of a Crack Opening from a Continuous Approach using Regularized Damage Models
Frédéric Dufour, Gilles Pijaudier-Cabot, Marta Choinska and Antonio Huerta

Tuesday, July 1st 16:30 - 18:30
Numerical Techniques for the Modelling of Material Failure in Solids VI
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237F

16:30 Limit Analysis based Upscaling of Strength Properties and Investigation of Failure Modes of Two-Phase Materials
Josef Füssl and Roman Lackner

16:50 Modeling of Dynamic Fracture using Finite Elements with Embedded Strong Discontinuities
Christian Linder and Francisco Armero

17:10 Adaptive Dynamic Cohesive Fracture Simulation Using Edge-Swap and Node Perturbation Operators
Kyoungsoo Park, Glaucio Paulino and Waldemar Celes

17:30 Moving Finite Element Analyses for Dynamic Nonlinear Fracture of Voided Materials
Takehiro Fujimoto and Toshihisa Nishioka

17:50 A Numerical and Experimental Study of the Dynamic Propagation of Two Cracks in a Brittle Material
David Grégoire, Julien Réthoré, Hubert Maigre and Alain Combescure

18:10 Elusidation of Various Dynamic Fracture Mechanisms using the Moving Finite Element based on Delaunay Automatic Triangulation
Toshihisa Nishioka

Wednesday, July 2nd 10:30 - 12:30
Numerical Techniques for the Modelling of Material Failure in Solids VII
Minisymposium organized by Xavier Oliver and Francisco Armero

Room: CAS3.7
MS237G

10:30 Damage Evolution in Composites with a Homogenization Based Continuum Damage Mechanics Model
Somnath Ghosh and Jayesh Jain

10:50 A Multiscale Failure Framework for Thin Heterogeneous Structures
Caglar Oskay

11:10 Failure Detection in Masonry Shells Homogenisation and its Incorporation in Coupled Two-scale Computations
Benoit Mercatoris and Thierry Massart

11:30 Development and Verification of FE Model for Fatigue Crack Growth Simulation under Mixed Mode Conditions
Miroslav Španiel, Josef Jurenka and Jiří Kuželka

11:50 Low-Cycle Fatigue Analysis using the Direct Cyclic Approach
Zhen-zhong Du, Lin Xia, Michael Snyman and Chris Wohlever

12:10 Fatigue Crack Growth Simulation using S-version FEM
Masanori Kikuchi, Yoshitaka Wada and Hitomi Suyama