IACM/ECCOMAS Congress 2008

Thursday, July 3rd 14:00 - 16:00
Topology Optimization in Civil and Structural Engineering I
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski

Room: CAS0.1
MS065A

14:00 Topology Optimization of Structures - An Overview (Keynote Lecture)
George I.N. Rozvany

14:30 A New Parametrization Scheme for Shape Optimization in Plane Elastostatics
Shmuel Vigdergauz

14:50 Numerical Simulation of Damage Evolution by the Level Set Method
Grégoire Allaire, François Jouve and Nicolas Van Goethem

15:10 Shape Optimization for Elliptic PDEs: Optimality Conditions, Convergence and Stability
Karsten Eppler and Helmut Harbrecht

15:30 Optimal Design of Shallow Shells by the Translation Method
Grzegorz Dzierzanowski

Thursday, July 3rd 16:30 - 18:30
Topology Optimization in Civil and Structural Engineering II
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski

Room: CAS0.1
MS065B

16:30 Form: a Practical Layout Optimization Tool for Civil and Structural Engineers
Wael Darwich, Matthew Gilbert and Andy Tyas

16:50 Advances on Parallel Computing in Structural Topology Optimization
Jose Paris, Ignasi Colominas, Fermín Navarrina and Manuel Casteleiro

17:10 ForcePAD and Optimization - An Improved Tool for Conceptual Design
Jonas Lindemann and Lars Damkilde

17:30 Global Topology Optimization of Truss Systems using Modified Genetic Algorithm
Rimantas Belevicius and Dmitrij Sesok

17:50 Shaping of Modular Tensegrity Structures
Zbigniew Bieniek

18:10 Morphogenesis Design Support System of the Building Roof
Kazutoshi Tsutsumi and Jynya Owashi

Friday, July 4th 10:30 - 12:30
Topology Optimization in Civil and Structural Engineering III
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski

Room: CAS0.1
MS065C

10:30 On the Analogy between Structural Layout Optimization and Plastic Limit Analysis Formulations
Matthew Gilbert and Colin Smith

10:50 A Novel Numerical Topology Optimization Method
David Taggart and Peter Dewhurst

11:10 Optimal Topologies with Loading Uncertainties
Janos Logo, Mohsen Ghaemi and Majid Mohavedi Rad

11:30 Topology Optimization of Three Dimensional Structures with Contact Conditions
João Folgado, Paulo Fernandes and Helder Rodrigues

11:50 Topology Design Optimization of Switched Reluctance Motors for the Desired Torque Profile
Jaewook Lee, Jeong Hun Seo and Noboru Kikuchi

12:10 Multimaterial Topology Optimization as a Graded Material Design
Ryszard Kutylowski

Friday, July 4th 14:00 - 16:00
Topology Optimization in Civil and Structural Engineering IV
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski

Room: CAS0.1
MS065D

14:00 Optimal Shape Design subject to Variational Inequalities
Michael Hintermüller and Antoine Laurain

14:20 The Stiffest Plates and Shells of the Uniformly Distributed Kelvin Moduli
Tomasz Lewinski

14:40 On the Combination of the Topological Derivative Method with Free Material Optimization
Stefanie Gaile, Günter Leugering and Jan Sokolowski

15:00 Optimization of Periodic Microstructures using Shape and Topology Derivatives
Anca-Maria Toader

15:20 Topology Optimization of Optical Band Gap Effects in Slab Structures modulated by Periodic Rayleigh Waves
Allan Roulund Gersborg and Ole Sigmund

Friday, July 4th 16:30 - 18:30
Topology Optimization in Civil and Structural Engineering V
Minisymposium organized by Matthew Gilbert and Tomasz Lewinski

Room: CAS0.1
MS065E

16:30 Inverse Homogenization and Optimal Design of Composite Structures for Strength and Stiffness
Robert Lipton and Michael Stuebner

16:50 Topology Optimization under Multiple Load Case using a Biomimetic Approach
Michal Nowak

17:10 Saint Venant‘s Principle and its Implications to Topology Optimization
Cristian Barbarosie

17:30 Stress Constraints Aggregation in Structural Topology Optimization
Jose Paris, Ignasi Colominas, Fermín Navarrina and Manuel Casteleiro

17:50 Topological Derivative in Steady-State Orthotropic Heat Diffusion Problem
Sebastián Giusti and Antonio André Novotny